*** UPDATE *** We are proud to announce the completion of the Steamy Kitchen Palace Chicken Coop Construction Drawings. A 32 Page PDF showing every detail and measurement needed to recreate this chicken coop. It was professionally created by a licensed architect and comes complete with Bill of Material and an updated 3D model. We are asking for $15 to help offset the cost of producing these wonderful plans. There is more information about the plans at the end of the article. We will leave the original SketchUp file link up if you would like to work from just the model I used to create the coop.
Take me to the plans now!
When Jaden brought home 5 fluffy new friends in July of last year, I knew a chicken coop was in our future. I wanted to design and build it myself as a fun exciting project.
When I first started doing research on our new coop I spent a great deal of time on Back Yard Chickens looking for ideas and suggestions. We owe a great deal of credit to the people who were willing to share their coop photos. All of them gave me tips, ideas, and inspiration. We are grateful for their willingness to share their passion and work. Our girls would not have such a lovely home if it were not for the sharing of these people!
In that spirit, I wanted to create a pictorial showing how we made our coop. If you have any questions on how something was done, please ask and I will try to answer to the best of my ability.
We wanted to make sure our coop met the following requirements:
- It had to be aesthetically appealing as it would be highly visible.
- Easy cleaning and maintenance (including being able to stand inside & have easy access to clean coop).
- Sturdy to handle those occasional tropical storm conditions here in Florida.
- Designed to use Deep Litter Method in coop and run.
- Resistant to Summer Rain Flooding that occurs in that part of the yard.
- Good ventilation and air movement.
- With adequate room for 5-7 hens (I figured we would be adding one or two more hens later)
I probably spent the better part of two weeks of late night web surfing to gather ideas and develop a plan of attack. I checked, double checked and cross referenced everything from space per bird requirements, Deep Litter Method (DLM), nesting box sizes, roost length, building codes, roofing solutions, predator proofing, waterproofing, drainage ideas, working with concrete, to using explosive nailers. I must admit the internet is a wonderful tool.
At this point I would like to add my *** Disclaimer ***: I am not an architect nor structural engineer. They have not been approved to meet certain hurricane, earthquake, volcanic, flooding, nuclear blast or other natural disaster sized forces. I am a computer engineer, trained at West Point Military Academy (which means I’m obsessively detailed and thorough.) Our chicken coop has passed all local inspections. Please note that no chicken was harmed during the making of this coop and all testing was done in very controlled manner 🙂
I spent a fair amount of time looking for plans online. It seemed I was unable to located any free plans that seemed to meet what we needed. So I decided to use Google’s 3D modeling tool SketchUp to create a working model for our coop. It allowed me to spin the diagram in any direction and adjust it as I saw fit. It did take a while to get used to it, but the time spent in the learning curve was more than worth it during the construction phase. I can send you two files from SketchUp with the plans for the coop if you are interested. The first is the rough framing, while the second is the finished framing after the hardware cloth is installed.
For the free SketchUp plans – RIGHT CLICK here for a zip file and “Save link as”
*** Special Note *** – In the SketchUp files, please note all lumber is depicted as true 2 inch by 4 inch. In reality, lumber from a mill is rough cut to 2×4 and then finished down to a smaller size. Usually 1.5″ x 3.25″ inches. That means you will need to adjust lengths of the 2×4’s to compensate.
You must download and install Google’s SketchUp program for these files to work. Google SketchUp is a free program that you can download (make sure you download the correct file for your operation system (Mac or Windows). It’s a pretty complicated program to use if you are not used to 3D applications.
If you’re not familiar with 3D applications, we have hired a professional to convert the SketchUp files into a nice, neat, easy to read PDF. It’s for sale for $15 to help offset the cost of the conversion.
Designing the Chicken Coop
I decided on the following features for our coop:
- 5 – 7 egg laying hens (standard size)
- 10 sq ft of run space per bird
- 3 sq ft of coop space per bird
- 1 ft of roost rail per bird
- 1 nesting box per 3 birds
- sloped coop and nesting box floors for water drainage during clean outs
- sloped metal over wood roof that added stability as well as way to gather rain water.
- minimum 6 ft height so I could stand up inside.
- strength of construction to ensure durability and stability
- easy access doors for cleaning as well as egg harvesting
- raised foundation to help prevent flooding
- 1/2″ hardware cloth used for screening
The entire structure is 12 ft by 6 ft. The coop measures 4 ft by 6 ft. The roof has a 1 ft overhang on all sides which gives us a 14 ft by 8 ft roof. The coop floor is approximately 30 inches above the run floor.
Chicken Coop Foundation Phase
One of the biggest concerns I had was dealing with the potential flooding of the area surrounding the chicken coop. This past summer we had so much rain that the ground in the area became completely saturated. The ground was like a sponge and when you walked on it, you would sink an inch and water would flow around your boots. There was a concrete pad already poured where we wanted to build the coop, but we wanted to use that for a future shed or work area for the garden that is part of the same area. I made the decision to pour a footer attached to the existing pad to build the coop up on. This would raise the coop about 6 inches higher leaving room for drainage, even if the ground became completely saturated again.
It’s important during this step to make sure everything is square and level. After framing the footer I added rebar and drainage stones to help facilitate water flowing out of the chicken coop.
I mixed and poured the concrete using a mixer rented from Home Depot. If you’re wondering, the footer was 6 feet wide by 12 feet long and 6 inches across. The 24 linear feet took over 1/2 ton of concrete. Mix it with a mixer, or better yet, call a concrete company and have them deliver your required concrete premixed. Your back will thank you!
When I went to remove the forms, I noticed this in the concrete.
It seems Jaden let the chickens out some time after I poured the cement before it had cured sufficiently. I found the guilty party not to far away with her concrete shoes. Even to this day she is claiming her innocence and blames it on Chicken Little.
Before I poured the concrete I had inserted a four foot section pvc pipe on the lowest part of the coop. I cut, drilled and assembled PVC pipe to act as a drain if a sever downpour occurred. The holes are about 2 inches apart.
Another view of drainage system.
I ordered a 1/2 cubic yard of gravel and a cubic yard of sand from a local aggregate company. They were kind enough to deliver it right to my driveway much cheaper than buying a huge number of bags at the local home improvement store (not to mention the numerous trips it would have taken to carry the weight). I used the gravel to build up the floor of the coop. Later it will be covered with weed prevention cloth and then the sand will be added. This put the “floor” of the coop at least six inches higher than the surrounding ground. Hopefully this will keep the ladies’ feet dry.
Chicken Coop Framing Phase
Framing was new to me. I had a general idea on how things were supposed to go, but no real framing experience. I did spend some time looking for nailing requirements and and how best to secure the coop to the foundation. During this research I came across a great deal of information on basic framing. I printed out images from the sketch-up and used them as a reference to cut all of the framing pieces. After cutting, the family pitched in to help pre-stain all the pieces. We used a good water sealant stain and made sure we had good coverage on all the pieces, especially the ones that would have direct contact with the concrete.
I was fortunate enough to have family help stain the wood.
The process of cutting and staining all the pieces took much longer than anticipated. Painting or staining after assembly might have been easier and faster. Might be something to consider.
Framing took several days. Keep in mind if you are working by yourself use numerous clamps and braces to keep everything where it is supposed to be.
After getting the initial walls and roof beams up, I used a powder activated nailer to secure the kick plates to the concrete putting a fastener about every foot. Probably more than I needed, but I was enjoying the process so a few extra fasteners never hurt. I had to vary the loads of powder if I was nailing into the concrete pad or the footer.
And another view from the opposite side. From this angle it is a little easier to see the coop floor is tilted towards the side where the door will go.
I cut the coop floor from plywood and then started installing the 1/2″ hardware cloth.
It’s a pretty straight forward job of measuring, cutting and then installing the hardware cloth. I used an automatic stapler to secure the cloth to the framing. Later it will be sandwiched between the framing and the finish framing piece. An automatic staple gun is an absolute must during this phase.
I then installed the finish framing pieces that were designed to hold the cloth in place.
These pieces help secure the cloth on the inside of the coop.
I also installed the roof sheathing at this time to help keep some of the rain out. I left some of the finish framing pieces off till after installing the walls.
Framed out where the hen door was going.
And also the nesting boxes. The boxes themselves measure about 14 inches across, 16 inches tall and 12 inches deep. You can’t tell from the picture, but the floor of the nesting boxes is tilted towards the coop so water will flow out when cleaning. Notice the gap between floor of nesting box and the retaining board. You can also see the sloped coop floor pretty well in this picture. Also note that the nesting boxes are up about 6 inches off the floor to allow for the DLM.
Chicken Coop General Construction Phase
I picked up some very inexpensive vinyl flooring tiles from the local home improvement store. They were quick and easy to install and hopefully will help when cleaning out the coop.
Here is a picture of the removable stopper blocks.
And with them removed as if we were cleaning the coop out.
Built and mounted the main access door.
Other side of door.
I also built the access ramp.
It is secured using four eye bolts. The two on the bottom of the ramp have been cut using a hack saw to make hooks. The ramp can be removed and washed off with a hose. I didn’t install this till after I had the walls up on the coop, but I wanted to show it to you here.
Building the Coop Phase
The coop walls are built with simple siding sheets found at Lowes. They are shiplap boards that have an overlapping edge on them. I decided to build the panel, install them on the coop, trim and then stain the boards. Most of the trim pieces are 1 x 4 strip. I choose the strip over the normal 1 x 4 boards because they were much cheaper and already had the rounded edge. Surprisingly the strip boards actually had very few knots and were fairly straight. I had to cut two of the finish framing pieces to install the ventilation and siding above the coop door. I had forgotten the roof would hang down and interfere with the door opening. Using a skill saw set at the appropriate depth this wasn’t a major issue.
I also secured a 2×4 to act as my door stop as well as my support for the siding. The ventilation holes were created using a 2″ hole saw and covered with 1/2″ hardware cloth.
Next, I built the coop door and trimmed it.
Here is a close up of the back of the door showing the hardware cloth sandwiched between siding and trim pieces.
Then installed it on the coop.
Then the same process for the rest of the sides.
Back coop wall installed.
Nesting box side.
Chicken ramp side wall.
Stained inside and out. Seems Nathan decided he liked to pretend he was a hen checking out the new coop.
Built the nesting box cover out of siding and some trim pieces I had laying around. I used an extra trim piece that will attach to the wall to create an overhang. Hopefully this will help reduce or eliminate water leaking into the coop from the nesting boxes. I will also put weather sealing around the rim to help make it water tight. There is also a lip on the bottom of the siding around the nesting boxes, but it might be hard to see in this picture.
Installed the missing finish framing pieces under the coop. This is a good view of where the concrete pad and footing are connected. Using the pre-existing pad helped reduce the amount of concrete in this project. The coop height also gives the chicken’s adequate headroom.
Chicken Coop Run Floor Phase
I put weed block cloth down to prevent weeds from growing up through the floor and more importantly, preventing the sand from washing down through the rocks. It will also allow water to seep through into the drainage system.
Put sand around the edges to hold it in place.
Then I moved this cubic yard of sand…
Into the coop. In the end I think I ended up with a little less than 6 inches of base sand on top of a four inch rock base.
Chicken Coop Roof Phase
Built and painted the gutter. At fourteen feet, the gutter was going to be multiple pieces. It was pretty straight forward as far as assembly goes, but it did give me reason to pick up a pop-rivet tool. I always enjoy picking up new tools!
Installed it on the edge of the coop. I debated about building wedges to make the gutter parallel with the ground, but decided the 10 degree difference between roof and ground could be accounted for in the mounting. When I mounted the gutter to the coop I realized the lower end would be below the drip edge from the roof. I cut a piece of aluminum from the unused portion of gutter and painted it. It was installed overlapping the back of the gutter but will be under the drip edge from the roof.
Then I papered the roof and put down the 1×4 stripping to give breathing room.
Following a suggestion from this post on how to install a metal roof, I laid the metal roof out on the lawn to determine where the ribs would be in comparison to where the edge would be. I trimmed the roof on both side edges to ensure I would not have a rib where the edging would be.
Then installed the roofing on the coop. If you have never installed any type of roofing, plan for some extra time in this step. Be careful and think safety. Winds can be dangerous when handling these large metal sheets and the edges are very sharp.
Chicken Coop Finishing Details
The final stretch was finishing the nesting boxes and installing the roost bar. The chickens seemed to enjoy the temporary bar I was using for their roost, so I rounded the edges a little and left it unstained. No real reason why, I just liked it that way. I also think it was easier for the chickens to see. Seems they were having trouble accurately judging a stained one I had in there during hours of low light.
I used some trim pieces to give the nesting boxes a little more cozy feel. I am pretty sure the girls didn’t care one way or the other, but I like the look of them with the trim in place.
Here’s a view from the outside showing the trim pieces. My wife and kids added the fake wooden eggs to give the girls a hint of what they are supposed to do and where to do it.
Built and installed the coop door. The rope is pulled from the front to open the door and is hooked on to a cleat to keep it open. We leave it open most of the time, closing it during very windy or cold nights. I used some furniture slides on the door inside the track to help it move easily.
Close up of the door. When the door is closed it does extend a bit below the door opening to help prevent little racoon fingers from trying to open the door (in theory at least).
Here is the cleat for holding the door open.
We also hung a little child’s rake on the outside and use this to help turn under the poop or spread new wood chips in the coop. Very handy!
We moved the girls in and they seem very happy.
You can read about our first egg-perience here: Our First Egg.
And here is one of the recipes she used our fresh eggs in: Crepes with Salted Lemon Butter Caramel.
Lessons Learned from Building Chicken Coop
- Double check length of your lumber, especially the longer pieces. The 12 foot and 14 foot pieces I got from the store were longer by almost two inches. Without catching this, the coop would not have fit on the footer.
- When squaring the footer use either the 3-4-5 triangle method or diagonal corner method. Both of these methods assume that your opposite sides are equal in length for the rectangle to be square.
- Getting help framing is always nice. Having an extra pair of hands makes holding things in place much easier. If you are going it alone, then don’t hesitating in generous use of clamps and temporary alignment guides.
- The chicken coop ramp’s rungs are made of 1×2 on 6 inch centers. The girls seem to skate down between rungs, maybe a little closer together would have been better. They don’t seem to mind and go in and out the coop all the time. I’ll keep an eye on this to see if it becomes an issue. If you are moving your chickens when they are smaller, then build a ramp with closer rungs. After they mature you can swap out the ramps.
- I did add a removable board across the coop door to hold the shavings in when we open the door. It’s held in place by a piece of 1×2 on each side of the coop and it slides up for removal.
- Don’t think that because someone works at a big box home supply store they know everything you need. I ran into issues when ordering the roof for the coop. I went in and asked their special projects desk person for assistance in ordering everything I needed for an 8 x 14 foot metal roof. After I picked up all the parts I went online to the manufactures web site to see if they had any special instructions. After finding their installation guide, I quickly realized I was missing half the parts required to complete the roof they way I had explained it to the salesperson. It’s better to take some time and research exactly what you will need before you go to the store than it is having to wait 2 more weeks to get the rest of the parts delivered.
- Pre-drilling holes for nails and screws makes things much easier when you are working on top of a ladder.
- If you have young children like we do who want to collect eggs from the nesting boxes, then top opening boxes may not be the best bet. We had to put a step stool out by the coop so the kids could open the boxes and reach the eggs. I wouldn’t lower the boxes any, but I might consider making a back door instead of the top opening. Just a thought.
- I love the slanting floors of the nesting boxes and the coop. Remember to factor that slope in when building your walls. Double check all your measurements and calculations. Also installing the walls is another great time to ask for a little assistance.
I’m really happy how things are going so far. I’ll keep you posted as we progress.
Want to see what people have created from our plans?
Check out these amazing coops! I am blown away by how people have adapted these simple plans into their own works of art! Click the photo below for a quick tour of these variations!
Would You Like A Copy Of Our New Chicken Coop Plans PDF?
We are happy to announce we have had our 3D SketchUp plans professionally converted to a very detailed 32 page PDF so you can re-create this coop for yourself. I must admit, I wish I had these plans when I started, things would have been a lot easier!
Included in the set are:
- 32 page PDF with over a 100 detailed drawings
- Complete Bill of Materials with Estimated Cost
- Bill of Materials Spreadsheet to track your expenses
- Revamped 3D model that you can show your significant other what it will look like!
This is a sample page from the plans so you can see just how detailed they are.
We are very happy with how these construction plans turned out and we hope they will be well used by everyone. We are offering these plans for $15 which will help cover the cost of having them professionally created. The plans will more than pay for themselves in just the time saved by using them. I spent many hours creating the original model and even more time taking measurements from the model and then going to the workshop to cut the pieces. This set of plans eliminates that for you.
The link below will take you to our secure order form. Fill out the information and you will get instant access to all the files for the coop.
BUY THE STEAMY KITCHEN CHICKEN COOP PLANS
Thank you for your support.
Of course, if you would rather have the original SketchUp files, they are available below free of charge.
Free Chicken Coop Plan: Download the Google SketchUp Files
You must download and install Google’s SketchUp program for these files to work. Google SketchUp is a free program that you can download (make sure you download the correct file for your operation system (Mac or Windows). Just note that it’s a complicated program to use if you are unfamiliar with 3D modeling software.
For the free SketchUp plans – RIGHT CLICK here for a zip file and “Save link as”
- CBD Stylo Vape Parfait pour CBD E-Liquid pas de nicotine
- Fonctionnement sans boutons - Dessinez quand vous voulez. Le coffre-fort s'occupe de tout.
- Connexion magnétique - Connectez facilement le réservoir au nebula Edge à l'aide d'un verrouillage magnétique.
- Portable - Se glisse dans la paume de votre main et s'emporte facilement n'importe où.
- Vente interdite aux personnes âgées de moins de 18 ans. En effectuant une commande de ce produit sur Amazon.fr, vous certifiez avoir plus de 18 ans
- Complete Kits - 1x 1100 mAh battery, 2x cartridges (empty), 1x USB cord, 1x user manual, and everything packed in a soft zipper case for super portability. Put in your pocket, also fit in your bags, vape anytime, anywhere!
- Innovative Creation - The ceramic coil technology takes vaping to higher level with unprecedented pure and intense vapor production for both normal e-liquid and CBD hemp oil.
- Freshness maximization - Different from the plastic cartridges on the market that give you nasty taste, this cartridge is made of stainless steel, Pyrex glass and ceramic to maximize the freshness of the oil and e juice.
- Long-Last Battery Power - Come with an 1100mAh high capacity battery which offers ample power for everyday use. It can be charged easily with micro USB power sources.
- Quality Assured, Valuable - Strictly in lab tested, can be used with both CBD and normal e liquid. Size of the cartridge is 1.0ml, not exceeding 2ml. We provide 24/7 customers service and whole life money-back guarantee. (Sans nicotine Ni Tabac)
- Technologie de chauffage révolutionnaire: Les bobines en céramique innovantes chauffent de manière homogène pour un goût plus pur et une fumée plus épaisse en comparaison aux mèches en coton qui peuvent contaminer votre bouffée.
- Utilisation facile:Appuyez sur le bouton 5 fois de suite pour allumer/éteindre.SELENE adopte une conception aérodynamique, donc seulement une vapote complet et longue peut vomir beaucoup de fumée.Et puis,le joint au haut du réservoir garantit une expérience sans-fuite à chaque bouffée. Et il n’est pas aussi facile à fuir quand vous la porter sur le corps.
- Mode de préchauffage:On adopte une autre conception du mode préchauffage.Lorsque la batterie est en mode veille, appuyez deux fois de suite sur le bouton pour passer en état de préchauffage constant à 150°C. A ce moment-là,vous n’avez plus besoin de appuyer le boutotn,dès que vous vapotez,la machine fonctionne et le Led indicateur sera lumineux.Et elle va arrêter de fonctionner automatiquement dès que vous ne l’utilisez pas.Pour plus de details, vous pouvez lire attentivement le mode d＇emploi
- Remplissage sans difficulté:On vous offre une flacon à aiguille pour remplir la liquid plus facilement.Une recharge de la e-liquide vous permets de vapoter environ 400 bouffées(équivalent à 30 cigarette).Et on vous offert gratuitement 1 atomiseurs de rechange.Si vous avez besoin de le changer fréquemment, vous pouvez trouver les bobines en vente sur notre boutique. Remarque:On peut remplir tout les sels de nicotine e-liquide ou l'huile de CBD/THC.
- Satisfaction de la garantie: Si vous rencontrez des problèmes concernant du produit,vous pouvez obtenir le remboursement complet dès que vous retournez le produit à Amazon pendant 3 mois. Et pour des conseilles concernant de l'utilisation,vous pouvez lire la description du produit. Enfin n'hésitez pas à nous contacter si vous avez des problèmes.
- Le Fenix Mini est actuellement le plus petit vaporisateur à convection de Weecke. Comme le grand frère, le Fenix Mini a une chambre en acier inoxydable et ne correspond pas au Fenix en termes de qualité et d’efficacité de la vapeur. Au contraire, la technologie a été légèrement affinée, ce qui rend le Fenix Mini encore plus rapide.
- Le Fenix Mini est très compact et se glisse dans toutes les poches (format de paquet de cigarettes). En plus, il est très bon à la main.
- De plus, une chambre en verre de quartz est incluse dans la livraison avec laquelle vous pouvez évaporer les huiles et les cires.
- Un grand écran OLED indique la température exacte, le niveau de la batterie et la température définie. De plus, une LED verte indique que le Fenix Mini a atteint la température souhaitée, visible à travers une fenêtre dans l'embout buccal.
- Pour sa petite taille, le Fenix Mini offre une durée d'utilisation maximale! La durée d'utilisation efficace est d'environ 30 minutes. C'est un véritable vaporisateur à convection. Ils sont beaucoup plus puissants que les vaporisateurs à conduction, mais consomment également plus d’énergie.
- 【Qui consiste】Le Vaporesso Target Mini 2 est un kit de nouvelle génération avec 2000 mAh Target Mini 2 MOD et VM Tank 2ml
- 【Sortie】 La sortie réglable répond à vos différents besoins en vape de 5W à 50W
- 【Bobine】 Le tout nouveau VM Tank est livré avec deux bobines, une bobine CCELL pour sels de Nic / CBD et une bobine maillée en fibres de thé pour le jus de base libre
- 【Conception】Le système de recharge supérieur et l'AFC inférieur de VM Tank vous aident à acquérir une saveur pure et dense avec des nuages épais
- Vente interdite aux personnes âgées de moins de 18 ans. En effectuant une commande de ce produit sur Amazon.fr , vous certifiez avoir plus de 18 ans
- ▶▶ LE KIT CONTIENT. ---- ▶▶▶1x e-Cigarette électronique avec une batterie de 650 mAh, 2x Réservoir de 2ml, 1x Bouteille de remplissage (sans liquide), 1x Câble de chargement USB, 1x Notice d'utilisation. Livré sans liquide, cet article ne contient pas de nicotine et est conforme aux normes TPD, CE et certifié RoHS.
- ▶▶ FACILE A REMPLIR ET SAVEURS RICHES. ---- La cigarette électronique est une sorte d'atomiseur rechargeable, qui peut être remplie dans une variété de saveurs.
- ▶▶ SIMPLE A UTILISER. ---- Le kit de vape à un bouton multifonction; 5 clics rapides sur le bouton d'alimentation pour l'allumer et ensuite vous pouvez directement inspirer sans à avoir maintenir le bouton.
- ▶▶ MAGNÉTIQUE. ---- Le module contient deux connecteurs magnétiques qui permettent de maintenir fermement la cartouche à sa place.
- ▶▶ SYSTÈME INTELLIGENT. ---- Le pod est équipé de la technologie CSA (Cellular Spiral Airflow). Une puce est installé dans le pod pour vous assurer une sécurité accrue comme : protection contre la surchauffe; protection contre le court-circuit; 10 secondes Protection contre l'inhalation; Protection contre les courts-circuits; 2 modes pour régler la tension. ---------- Vente interdite aux personnes âgées de moins de 18 ans. En effectuant une commande de ce produit sur Amazon.fr, vous certifie
- 【Multi-usage】L'huile de chanvre aide à soulager le stress et l'anxiété, à améliorer le sommeil, à réduire l'inflammation, à soulager les douleurs articulaires et à stimuler le métabolisme.
- 【Riche en nutriments naturels】L'huile de chanvre contient une vaste gamme de nutriments précieux, tels que les acides gras essentiels oméga-3,6,9 et la vitamine, qui peuvent contribuer au bien-être général.
- 【Complément alimentaire】Chaque portion (15 gouttes) contient 16,66 mg d’extrait d’huile de graines de chanvre. Il vient dans une grande saveur de menthe poivrée, vous pouvez également l'ajouter à votre nourriture ou boisson quotidienne.
- 【Extrait Premium】Fabriqué avec les meilleurs ingrédients, tous d'origine naturelle. Convient aux végétaliens et végétariens.
- 【Garantie de satisfaction à 100%】Si vous avez des questions, n'hésitez pas à nous contacter par courrier électronique. Nous fournissons une protection garantie à 100%.
- 【7 à 80 Watts】 Puissance réglable de 7w à 80w en fonction de vos habitudes de fumer. L'écran OLED vous montre clairement les données (y compris le niveau de puissance, l'état de la batterie, la résistance de l'atomiseur en temps réel). Il est adapté aux débutants.
- 【Batterie 2500mAh】 Construit en pleine capacité haute qualité batterie rechargeable au lithium, batterie longue durée, chargeur micro USB est insérée dans le port USB externe.
- 【Conception de poche】 Une plateforme courbée, compacte et tendance, un tout dernier réservoir de 2 ml de la bouche au poumon, réduit le débit de circulation de l'air. C'est un meilleur kit de vape de cabine qui offre une meilleure expérience de saveur.
- 【Facile à utiliser】 Vous pouvez activer et désactiver la batterie en appuyant rapidement 5 fois sur le bouton d'alimentation en 2 secondes. Vous pouvez également remplir l’e-liquide et remplacer facilement la bobine (une tête de bobine de 0,5 ohm est incluse dans l’emballage. Si vous avez besoin de davantage de bobines, veuillez chercher ASIN: B07T6LQW48).
- 【Garantie de sécurité et de qualité】 Nous promettons une garantie de qualité de 6 mois. Nous avons une équipe de service après-vente professionnelle pour faire les choses dans les 24 heures. * Il est interdit de vendre aux moins de 18 ans. En commandant ce produit sur Amazon.com, vous aurez 18 ans ou plus.*
- Batterie de 1500 Mah Classique
- Premier Appareil Avec Sécurité Enfant Protection anti fuite, peut se ranger dans une poche
- E-liquid Illumination LED Avec 7 Changeable Couleurs
- Débit D'air Réglable Contrôle et Astuce De Goutte À Goutte Avec Spiral Carburant Protection
- Produit Original , authentification en ligne possible sur le site du fabriquant grace au numéro de série au dos de la boite.